•
If you do not answer this recall within a pre-programmed period of time,
it will go to the system operator.
CONSULTATION HOLD
When you are talking on an outside line and it is necessary to consult with
another extension:
•
Press the
TRANSFER
key; you will receive transfer dial tone. Your call is
placed on transfer hold.
•
Dial the extension number.
•
Consult with the internal party.
•
Press
TRANSFER
to return to the outside party or hang up to transfer
the call.
NOTE: Repeatedly pressing the
TRANSFER
key will toggle between the
outside party and internal extension.
RETRIEVING CALLS HELD AT
ANOTHER STATION
When a line is on hold and it appears on your keyset, press the line button
with the red flashing light.
When a line is on hold and it does not appear on your keyset, dial
12
plus
the line number or the extension number of the station that placed the call
on hold.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPEAKER
key before you begin dialing.
CALL PARK
You can park an outside call in one of 10 “parking orbits”.
•
Press the
PARK
key and dial the orbit number required (0-9); the key
which the call was on will flash.
OR
•
Press a dedicated
PARK
key which will also flash.
•
To have the call picked up by another station notify the station user of
the parking orbit number.
To pick up a parked call.
•
Press the
PARK
key followed by the orbit number required or press the
flashing
PARK
key.
11
iDCS_16_DS_24D.qxd 12/14/2004 3:48 PM Page 17
TRANSFERRING CALLS
Transfer is used to send any call to another extension in one of two ways.
You can do a screened transfer by informing the other extension who is call-
ing or you can do a blind transfer without notification.
•
While on a call, press the
TRANSFER
key and dial an extension num-
ber or group number. Your call is automatically put on transfer hold.
OR
Press a
DSS
key or station group key. Your call is automatically put on
transfer hold.
•
Hang up when you hear ringing (this is an unscreened or blind transfer).
OR
Wait for the called party to answer and advise him/her of the call and
hang up. If the transfer is refused, you will be reconnected to the outside
line when the called station hangs up or you can press
TRANSFER
to
return to the outside party. If you wish to send the call to another exten-
sion without waiting for the first station to hang up, simply press anoth-
er
DSS
button.
OR
Press the
CALL
button or C.O. line key to return to the outside party and
begin the transfer process again.
When you are transferring a call to a keyset set for Voice Announce or Auto
Answer, the transferred call will always ring.
NOTES:
1.
After the inside party answers, you may alternate back and forth
between the parties by pressing the
TRANSFER
key.
2.
If you receive No More Calls tone, that station has no key available to re-
ceive another call. Press
TRANSFER
to return to the other party.
3.
You cannot transfer an Intercom call by pressing a
DSS
key. You must
press the
TRANSFER
key and dial the destination extension number.
TRANSFER WITH CAMP-ON
When you are transferring a call to another station and you receive a busy
signal, you may camp the call on to this station. Simply hang up when you
hear the busy signal. The called party will be alerted that a call is waiting for
them.
NOTE: If you receive No More Calls tone, that station has no key available
to receive another call. Press
TRANSFER
to return to the outside caller.
12
iDCS_16_DS_24D.qxd 12/14/2004 3:48 PM Page 18
