45
iDCS_16_DS_24D.qxd 12/14/2004 3:49 PM Page 51
GETTING STARTED
Using your new SVM/SVMi E-Series Subscriber Services is as simple as fol-
lowing a few simple spoken instructions. First time users should read this
section as a tutorial. You should start with the following steps:
•
Access your Subscriber Services Menu - You already know how to do
this.
From the Subscriber Services Menu:
•
Record a Primary/No-Answer Personal Greeting. Dial
[5][1]
.
•
Record a Mailbox Greeting. Dial
[5][7]
.
•
Change your access code (Password). Dial
[#][7][1]
.
•
Record your name. Dial
[#][7][2]
.
•
Enter your directory name. Dial
[#][7][3]
.
After you have completed the steps above your Subscriber Services are set
up and ready to use.
LISTENING TO YOUR MESSAGES
If there are new messages in your mailbox your
[VMMSG]
key will be lit. Call
the SVM/SVMi E-Series by pressing this key, and when prompted enter your
password. You will then be at the Subscriber Services Menu. Select
[1]
to
listen to new messages or
[3]
to listen to saved messages.
Note:
After you enter your password, if “Autoplay of New Messages” is
enabled and you have new messages the SVM/SVMi E-Series will begin to
play them automatically. A subscriber can control this feature. From the
Subscriber Services Menu
[6] [5]
toggles “Autoplay of New Messages”
ON/OFF.
1
LISTENING TO NEW MESSAGES
11
GROUP NEW MESSAGES
2
RECORD AND SEND A MESSAGE
3
LISTENING TO OLD MESSAGES
33
GROUP OLD MESSAGES
4
ACCESS MANAGER
5
PERSONAL GREETINGS
6
MAILBOX ADMINISTRATION
8
PAUSE / RESUME
0
PLAY MENU OPTIONS
46
iDCS_16_DS_24D.qxd 12/14/2004 3:49 PM Page 52
