Samsung AM0 SERIES, Руководство по установке

Страница: 36 / 92

36
English
Instal
lation
Step 5. Check operation
1. Set the indoor unit address and installation option with remote controller option. Set the each option separately
since you cannot set the ADDRESS setting and indoor unit installation setting option at the same time. You need to
set twice when setting indoor unit address and installation option.
2. Take the batteries out of the remote controller to exit programming mode and insert them again and then press the operation button.
3. Reset Indoor Unit after option code programming.
Setting an indoor unit address (MAIN/RMC)
1. Check whether power is supplied or not.
‐ When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
3. Assign an indoor unit address by wireless remote controller.
‐ The initial setting status of indoor unit ADDRESS(MAIN/RMC) is
“0A0000-100000-200000-300000” (address: 00, RMC1: 0, RMC2: 0).
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE Setting Main address 100-digit of indoor
unit address
10-digit of indoor
unit
The unit digit of an
indoor unit
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0 A
0
No Main
address
0~9 100 -digit 0~9 10 -digit 0~9
A unit
digit
1
Main
address
setting
mode
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE - Setting RMC address - Group channel(*16) Group address
Indication
and Details
Indication Details
-
Indication Details
-
Indication Details Indication Details
1
0
No RMC
address
RMC1 0~F RMC2 0~F
1
RMC
address
setting
mode
CAUTION
• When “A”~”F” is entered to SEG5~6, the indoor unit MAIN ADDRESS is not changed.
• If you set the SEG 3 as 0, the indoor unit will maintain the previous MAIN ADDRESS even if you input the option value of SEG5~6.
• If you set the SEG 9 as 0, the indoor unit will maintain previous RMC ADDRESS even if you input the option value of SEG11~12.
• You cannot set SEG11 and SEG12 as F value at the same time.
Setting an indoor unit address and installation option
AM072TNZDCH_IM_DVM V-AHU_AA_EN_.indd 36 2020-02-14 오전 10:33:40