31
Installation Pr
oc
edur
e
English
CAUTION
• If you enter A to F to the SEG5 or SEG6, the fan coil
unit main address is not changed.
• If you enter 0 to the SEG 3, the fan coil unit maintains
the previous main address although you enter the
option value for the SEG5 or SEG 6.
• If you enter 0 to the SEG 9, the fan coil unit maintains
previous RMC address although you enter the option
value for the SEG11 or SEG12.
• You cannot set the SEG11 or SEG12 to F value at the
same time.
Setting the fan coil unit installation option
(suitable for the condition of each installation
location)
1
Make sure that the power is supplied to the fan coil
unit.
• If the fan coil unit is not plugged in, it must
include a power supply.
Fan coil unit
1(L)
F2
F1
2(N)
2
Make sure that the panel or display is connected to
the fan coil unit so that it can receive options
3
Set an address for each fan coil unit using the remote
control, according to your air conditioning system
plan.
• The fan coil unit addresses are set to 020010-
100001-200000-300000 by default.
• The 05 series SEG20 option, individual control
with remote control, allows you to control
multiple fan coil units individually by using the
remote control.
4
Set the fan coil unit installation options using the
remote control.
Installation options for the 02 series
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
0
2
Evaporator Drying
Use of external
temperature sensor
/ Minimizing fan
operation when
thermostat is off
Use of central
control
Compensation of the
fan RPM
SEG7
SEG8
SEG9
SEG10
SEG11
SEG12
1
Use of drain pump
Use of hot water
heater
-
-
Dew removal
operation in
Wind-Free mode /
Auto Evaporator
Drying fan mode /
Auto fan smart
comfortable mode
SEG13
SEG14
SEG15
SEG16
SEG17
SEG18
2
Use of external
control
External control
output /
External heater
output /
Cooling operation
output /
Cooling output by
external equipment
-
Buzzer control
Maximum filter
usage time
SEG19
SEG20
SEG21
SEG22
SEG23
SEG24
3
Individual control
with remote control
Heating setting
compensation
offset / Removing
condensated water
in the Heat mode
-
Motion detection
sensor
-
DB68-11289A-01_IM_DVM FCU WindFree 4way_EU_EN_.indb 31
2022-04-26 오전 8:55:24