Samson series 43, Перевод оригинальной инструкции

Страница: 7 / 56

EB 2430 EN 1-3
Safety instructions and measures
These mounting and operating instructions cover the standard version of the devices and the
standard mounting parts. Components that differ to those described in this document can be
added or removed. Refer to the mounting and operating instructions of the components not
covered in this document for the safety instructions and measures that need to be observed.
Responsibilities of the operator
Operators are responsible for proper use and compliance with the safety regulations.
Operators are obliged to provide these mounting and operating instructions as well as the
referenced documents to the operating personnel and to instruct them in proper operation.
Furthermore, operators must ensure that operating personnel or third parties are not exposed
to any danger.
Operators are additionally responsible for ensuring that the limits for the product defined in
the technical data are observed. This also applies to the start-up and shutdown procedures.
Start-up and shutdown procedures fall within the scope of the operator's duties and, as such,
are not part of these mounting and operating instructions. SAMSON is unable to make any
statements about these procedures since the operative details (e.g. differential pressures and
temperatures) vary in each individual case and are only known to the operator.
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the referenced documents and observe the specified hazard statements, warnings
and caution notes. Furthermore, operating personnel must be familiar with the applicable
health, safety and accident prevention regulations and comply with them.
Referenced standards, directives and regulations
The control thermostat complies with the requirements of the European Pressure Equipment
Directive 2014/68/EU. Control thermostats with a CE marking have an EU declaration of
conformity, which includes information about the applied conformity assessment procedure.
This EU declaration of conformity is included in the 'Certificates' section.
According to the ignition risk assessment performed in accordance with EN 13463-1:2009,
section 5.2, the non-electrical control thermostats do not have their own potential ignition
source even in the rare incident of an operating fault. As a result, they do not fall within the
scope of Directive 2014/34/EU.
Î
For connection to the equipotential bonding system, observe the requirements specified in
section 6.4 of EN 60079-14 (VDE 0165-1).