Samson Media 7, Монтаж и эксплуатация

Страница: 74 / 96

74 EB 9510 EN
Annex
Menu Adjustment range/values/description
Power line frequency 1.10 The local power line frequency must be entered to be able to
properly filter out any disturbances which are transmitted over
ground wires or external power supply units.
▪ 50 Hz (default)
▪ 60 Hz
Start test 1.11 Executable function: two-wire test signal issued.
Test mode 1.12 Test mode is Active while the test is in progress (test duration:
30 s).
▪ Not active
▪ Active
Test signal of analog
output
1.13 Test signal in % based on the 4 to 20 mA signal range.
▪ –10.00 to +110.00 %
Device settings 2
General 2.1
Identifier 2.1.1 Enter a freely selectable code for the device (max. 15
characters)
▪ Enter characters as required (default: MEDIA7)
Filling level 2.1.2 The filling level in % can be displayed on the start screen.
▪ Yes
▪ No
Differential pressure 2.1.3 The differential pressure together with a unit can be displayed
on the start screen.
▪ Yes
▪ No
Pressure sensor 2.1.4 The value measured by the pressure sensor together with a unit
can be displayed on the start screen.
▪ Yes
▪ No
Unit of pressure sensor 2.1.5 Determine the unit for the value measured by the pressure
sensor
▪ Selectable units:
bar (default)/kPa/psi/cmH
2
O/mH
2
O/inH
2
O
MCN/SCN 2.1.6 MCN (maximum tank content in %) or SCN (tank content up to
overflow/gauge pipe) reading on the display.
▪ No (default)
▪ Yes