Samson Media 7 5007-1, Монтаж и эксплуатация

Страница: 104 / 124

16-2 EB 9510 EN
Annex A (configuration instructions)
Menu Adjustment range/values/description
Pressure span (reference) 1.9 Set the currently applied operating pressure
▪ 0 to 60 bar (default: 10 bar)
Pressure sensor span 1.10 Set span (resetting span is possible)
Password protection 1.11 The 'Specialist' user level can be protected by a four-digit code
(menu item 1.12).
▪ Not active
▪ Active
Password 1.12 Enter a four-digit code
▪ 0000 to 9999
Write protection (data
transmission module)
1.13 Activate write protection (data transmission module)
▪ Yes
▪ No
Power line frequency 1.14 The local power line frequency must be entered to be able to
properly filter out any disturbances which are transmitted over
ground wires or external power supply units.
▪ 50 Hz (default)
▪ 60 Hz
Start test 1.15 Executable function: two-wire test signal issued.
Test mode 1.16 Test mode is Active while the test is in progress (test duration:
30 s).
▪ Not active
▪ Active
Test signal of analog
output
1.17 Test signal in % based on the 4 to 20 mA signal range.
▪ –10.00 to +110.00 %
Further parameters exist in TROVIS-VIEW (see
u
EB 9510-2)
Device settings 2
General 2.1
Identifier 2.1.1 Enter a freely selectable name for the device (max. 15
characters)
▪ Enter characters as required (default: MEDIA7)
Filling level 2.1.2 The filling level in % can be displayed on the start screen.
▪ Yes
▪ No