Samson 5006-0, Монтаж и эксплуатация

Страница: 28 / 34

After acknowledging using the key,
8 seconds remain until a new error mess-
age can appear.
The short time interval is long enough to
start the transfer of new data from the mem-
ory pen.
The instrument is automatically reset on re-
moving the memory pen.
With communication using a PC or note-
book, the instrument is automatically reset
after the data is transferred.
Other errors
These errors must be acknowledged by
pressing the key to allow the instrument
to continue working.
9 Servicing explosion-protected
versions
In the event that a component of the Media
6 on which the explosion protection is
based must be serviced, the instrument must
not be put back into operation again until
an expert has inspected the device accord-
ing to explosion protection requirements,
has issued a certificate stating this, or given
the device a mark of conformity.
Inspection by an expert does not have to be
carried out, if the manufacturer performs a
routine check test on the device prior to tak-
ing it into operation again, and the success
of the routine check test is documented by
attaching a mark of conformity to the de-
vice.
Explosion-protected components may only
be replaced by original checked compo-
nents from the manufacturer.
28
EB 9527-1 EN
Servicing explosion-protected versions