Samplix Xdrop Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 23

Samplix Xdrop Скачать руководство пользователя страница 4

4

Xdrop™ instrument overview

The Xdrop™ droplet generator is compatible with Samplix dPCR cartridges for production of dPCR droplets
and Samplix dMDA cartridges for the generation of droplets for amplification of DNA. When using dMDA
cartridges, always use the accompanying holder. The Xdrop™ droplet generator is used for generating both
dPCR and dMDA droplets.

The Xdrop™ droplet generator is composed of the following parts (see figure below):



Drawer – holds the dPCR or dMDA cartridge.



Touch screen – provides the means to control the droplet generator with gloved or un-gloved
hands.



USB port on the back of the instrument – connects to a USB flash drive for troubleshooting, saving log files,
and for updating instrument firmware.



Status LED – Green when in standby and operating and yellow-green when opening and closing the
drawer.



Air vents on the back of the instrument – for ventilation.



A start button on the front of the instrument.



A hardware switch on the back of the instrument.

«
...
2
3
4
5
6
...
»

Содержание Xdrop
























Отзывы:

Нет отзывов