www.reikalevy.fi
37
Start cutting length adjustment by test driving the machine and measuring chopped wood on the
discharge conveyor. First adjust the basic advance.
•
At first, don’t pay attention to the first and last piece of wood. These should be adjusted last.
•
If chopped wood is too short -‐> decrease basic advance.
•
If chopped wood is too long -‐> increase basic advance.
•
When basic advance is set correctly, adjust the first and last pieces to correct length by
changing the sensor distance.
o
Increasing sensor distance lengthens the cutting length.
o
Decreasing sensor distance shortens the cutting length.
Sensor distance
Basic advance
