www.reikalevy.fi
19
6
Sequence valve adjustment
Required tools:
o
4 mm hex key
o
13 mm wrench
Sami Autochopper is equipped with two different size splitting cylinders. Smaller cylinder is fast and
bigger cylinder has more power. Sequence valves control transition between the two cylinders. It is
possible to adjust the transition by adjusting the sequence valves.
•
Place a piece of thick wood sideways in front of the splitting blade.
•
The idea is to just stress the splitting cylinders, not split the wood.
•
Push the splitting piston against the piece of wood using manual mode.
•
Take note of the delay when the bigger cylinder starts to push.
•
If the delay is over 3 seconds the sequence valve needs to be adjusted.
