Index revision : A
32
7159
•
Step 7
: Position / center the inner tube on
the center guide of the tool.
•
Step 8
: By pressing firmly on the top of the
tube (can be tapped with the mallet) push
the center tube into the washer until the
outer tube starts to center on the nose.
•
Step 9
: Once the nose is centered in the
tube, by tapping vertically with the mallet
at the top of the tube on the aluminum
body, push the nose into the outer tube:
The nose is resting on the outer tube.
The aluminium body is in contact with the
outer tube.
•
Step 10
: Check the position of the holes in
the inner tube.
Step 7
Step 8
Step 9
Step 10
+/-15
