Index revision : A
28
7159
Reassembly
•
Step 7
:
Apply a few drops of normal
threadlocker (P/N H2CPAL046) on the 4
fixing screws.
•
Step 8
:
Place the vibrator on the cart, screw
the screws crosswise and in approach,
then tighten to a torque of 10 N.m.
•
Step 9
:
Attach the ground cable lug by
tightening the screw to a torque of 7 N.m.
•
Step 10
:
Replace the vibrator panel.
•
Step 11
:
Replace the vibrating table by
checking the condition of the elastic pads,
replace them if necessary.
•
Step 12
:
Tighten the 4 screws fixing the
vibrator panel.
•
Step 13
:
Reconnect the vibrator cable on
the Inobox side.
Step 8
Step 9
Step 10
Step 11
