SAMES KREMLIN GNM 6080, Инструкция по эксплуатации, Страница: 49 / 86

49
DRT7105
G - 2022/11
Member of EXEL group
6.4.6. Procedure C3: Replacement of the high voltage cascade
• Step 1 : First, remove the trigger ( see § 6.4.10
page 52 ), remove the paint needle ( see § 6.4.3
page 42 ) and the fixing hook ( see § 6.4.11
page 53 ).
• Step 2 : Loosen the 4 screws (A) fastening the
barrel on the handle with a 2mm Phillips
screwdriver.
• Step 3 : Unscrew, manually or with a small flat
pliers, the three connection (B) wires of the
high voltage unit, pull carefully the contacts
towards the back.
• Step 4 : Remove the high voltage contact in
front of the barrel ( see § 6.4.4 page 45 ).
Withdraw the high voltage unit.
WARNING : Attention with the colors (terminal
1: black, terminal 2: green, terminal 3: pink).
To reassemble, follow the steps in reverse order.
Replace the high-voltage cascade. Coat the cascade
with dielectric grease (P/N # H1GSYN037) then
insert it into its housing.
Push the cascade fully into the barrel.
Connect the three wires and tighten the screws.
Check the wear of the o-rings, replace if necessary.
1
3
2
A
B