SAMES KREMLIN FPRO LOCK P LP, Документация

Страница: 16 / 55

SAMES KREMLIN - 3 - N° : 578.224.110-UK-2103
Index Instructions Description Part number
A 1 PTFE grease
PTFE grease (10 ml / 0.0026 US gal)
560.440.101
C 2
Low strength
- Anaerobic Adhesive Loctite 222 (50 ml / 0.013 US gal)
554.180.010
S 1
Torque screwing :
18 Nm / 13.276 Ft/Lbs
S 2 Torque screwing :
10 Nm / 7.376 Ft/Lbs
S 3
Torque screwing :
5 Nm / 3.688 Ft/Lbs

PROJECTOR (IND. 1 + 7 + 11/11A/11B) & VORTEX (IND. 18) REPLACEMENT
Unscrew the aircap assembly (1), then remove the aircap ring (2), the aircap only (4), the stop
ring (5) and the ring seal (6).
Trigger the gun (36) then unscrew the nozzle assembly (7) with the wrench provided with the
gun.
Remove the distribution ring (8) and the nozzle seal (10).
Remove the vortex (18) and the distribution ring (19).
For the guns, model FPRO P LP and CONV : unscrew the needle stop (22), then remove the
needle spring (20) and the needle (11a/11b) by the rear part of the gun.
For the guns, model FPRO P LOCK LP and LOCK CONV : unscrew the needle stop sleeve
(17), then remove the needle (11) by the rear part of the gun.
Check parts’ conditions. Change them if necessary.
Lubricate the needle (11/11a/11b) and the needle spring (20) with grease.
For the guns, model FPRO P LP and CONV : reinstall them as well as the needle stop (22).
For the guns, model FPRO P LOCK LP and LOCK CONV : reinstall them as well as the needle
stop sleeve (17) - screwing torque : 5 Nm / 3.688 Ft/Lbs.
Reinstall the distribution ring (19) and the vortex (18).
Reinstall the new nozzle assembly (7) - screwing torque : 18 Nm / 13.276 Ft/Lbs.
Reinstall the new aircap assembly (1).
NOTA : the gun can operate without vortex (18) if necessary.