SAMES KREMLIN FPRO LOCK P LP, Документация

Страница: 44 / 55

SAMES KREMLIN - 2 - N° : 578.026.110-UK-1708
TROUBLE CAUSE SOLUTION
No fluid out of the gun Clogged nozzle
Cut the pressure on the pump.
Depressurize the hoses.
Remove and clean the nozzle with
solvent by means of the brush.
Check the seal condition.
Pattern width narrows during
reversing phase of pump
Air trapped in the fluid circuit
Check connections and suction
hose quality.
Viscosity too high Reduce viscosity.
Aircap becomes dirty frequently Too much atomizing air Reduce air pressure.
Fluid seeping from the air holes of
the aircap
Defective tip seal Replace it.
Tip loose Tighten it.
Fluid leak at the packing Packing is worn
Tighten up the packing holder
without blocking the needle.
If there is still a leak, replace the
packing and the needle
.
Fluid leak at the front part of the
gun, trigger released
Impurities in the paint Trigger the gun 3 or 4 times.
Needle worn or/and nozzle worn Replace needle and nozzle.
Air leak at the valve Valve worn Change the valve.
Permanent air leak at the gun
aircap when the trigger is released
Friction on the needle
Remove the trigger and check the
needle.
Valve worn Replace the valve.