SAMES KREMLIN FPRO LOCK P LP, Документация

Страница: 50 / 55

SAMES KREMLIN - 2 - N° : 578.092.120-UK-2110
2.2. Technical features
FEATURES
FPro P LP / FPRO LOCK P LP FPro P CONV / FPro P CONV WBE
FPRO LOCK P CONV
+ HVLP aircap + LVLP aircap + CONV aircap
Version pressure
Maximum air supply
pressure (network)
6 bar / 87 psi
Air pressure at the gun
handle From 1.5 to 2.5 bar
/ from 22 to 36 psi
From 2.5 to 3.5 bar
/ from 36 to 50.7 psi
Air flow From 16.1 to 23.5 m3/h
/ from 9.5 to 13.8 CFM
From 21.8 to 28.2 m3/h
/ from 12.8 to 16.6 CFM
Fluid supply maximum
pressure 6 bar / 87 psi
Weight 495 g / 1.09 lb 381 g / 0.84 lb 495 g / 1.09 lb 381 g / 0.84 lb
Shades and hydro or solvent
based varnishes
- low viscosity
* * * * * * * * * *
- medium viscosity
* * * * * * * * * * * *
- high viscosity
* * * * * * * * *
Transfer rate
(EN 13966-1 standard) (1)
78 % ± 2 % 72 % ± 2 % 66 % ± 2 %
Maximum fluid temperature 50°C / 120°F
Wetted parts Nozzle, fluid passage : Stainless steel, POM C, Polypropylene
Needle : stainless steel treated
Body, trigger : Aluminium
Weighted sound pressure
(LAeq)
(under pressure
/ with tip, model 12)
86.3 dBa
(1) : Paint viscosity : 20 s CA n° 4 - 20°C / Gun aircap distance - surface to be painted : 20 cm
Nota : For the LP gun fitted with one of the HVLP aircaps, the maximum inlet air pressure at the
gun handle must not exceed 2 bar / 29 psi to maintain 0.7 bar / 10.1 psi or less at the aircap.

AIR AND FLUID SUPPLY
FPro P
& FPro Lock P
guns
Fittings mounted on
the gun Air and fluid supply
Air Male 1/4 NPS
Air hose (non-static hose)
LP : minimum
∅
8 mm ID (for a 7.5 m / 24.6 ft length)
CONV : minimum
∅
7 mm ID (for a 7.5 m / 24.6 ft length)
Fluid Male 3/8 NPS
For pressure gun (LP & CONV) :
Fluid hose : minimum
∅
7 mm ID (for a 7.5 m / 24.6 ft length)