SAMES KREMLIN FPRO LOCK P LP, Документация

Страница: 46 / 55

SAMES KREMLIN - 1 - N° : 578.007.120-UK-1804
1.
START-UP
Safety instructions :

Never try to stop the spray fan with any part of the body (hands, fingers…) or
with rags. Never point the spray gun at anyone or at any part of the body.

The operator will need medical attention if the high pressure material spray is in
contact with the the body (eyes, fingers…).

Always depressurize air and hoses before carrying out any servicing on the
gun.
In order to protect the operator, protective clothing (gloves, respirator
mask, glasses, hearing protective earplug, clothes…) are required.
Use the equipment in a properly ventilated area.
1- Unscrew the needle adjustment knob at the back of the gun.
2- Unscrew the air adjuster(s) (except for the Fpro Lock P spray gun).
3- Select the desired projector ( needle) best suited for the job at hand.
4- Screw on the nozzle, then the aircap to the gun.

We advice you to put the gun in the ‘OPEN’ position to prevent any damage to the needle while
fitting the nozzle
5 -Before tightening up firmly the aircap ring, position the aircap for the best spray. The fan is vertical
when the 2 ‘ears’ of the aircap are horizontal.
6 - Trigger the gun.
2.
ADJUSTMENT
This professional spray gun features 3 controls :

SPRAYING FINENESS
It is realized by the central air. The air is adjusted by means of the air regulator mounted upstream of
the gun on the network and more finely by means of the knob at the bottom of the gun handle of
some manual guns (optional for the Fpro Lock P spray gun).

FAN WIDTH (optional for the Fpro Lock P spray gun)
Can be adjusted by using the knurled knob. It controls the air going to the horns on the aircap. In this
way, the air is controlled through the fanned air outlets and allows the fan to change from flat (wide
open) to round (closed).

FLUID OUTPUT
Having selected the proper fluid nozzle / needle assembly and the fluid pressure, it is possible to
further control the output by changing the travel of the needle (needle stop knob) (optional for the
Fpro Lock P spray gun).
Optimal set-up is usually obtained when the product needle is completely open. When this needle is
nearly closed, a regular flow of product can not be guaranteed.