SAMES KREMLIN
Page 2
Manual : 573.190.112
Dear Customer,
We thank you very much for purchasing our PU 2125 F Flowmax® pneumatic two-component
pump. You are the owner of one of the most reliable pumping system available on the market.
Special care has been taken during all designing and manufacturing process to make sure your
investment will provide full satisfaction.
To get the best result, safe and efficient operation of your equipment, we advice you to read and
make yourself familiar with this instruction and service manual. Indeed, the non-compliance with this
instructions and precautions stated in this manual could reduce the equipment working life, result in
operating trouble and create unsafe conditions.
1. SAFETY
GENERAL SAFETY INSTRUCTIONS
CAUTION : The equipment can be dangerous if you do not follow our
instructions concerning installation and servicing described in this
manual and in accordance with applicable European standards and local
national safety regulations.
Please carefully read all the instruction literature before operating your
equipment.
Only trained operators can use the equipment
.
The foreman must ensure that the operator has understood the safety instructions for this equipment as
well as the instructions in the manuals for the different parts and accessories.
Read carefully all instruction manuals, label markings before operating the equipment.
Incorrect use may result in injury. This equipment is for professional use only. It must be used only for what
it has been designed for. Never modify the equipment. The parts and accessories supplied must be
regularly inspected. Defective or worn parts must be replaced.
Never exceed the equipment components' maximum working pressure.
Comply with regulations concerning safety, fire risks, electrical regulations in force in the country of final
destination of the material. Use only products or solvent compatible with the parts in contact with the
material (refer to data sheet of the material manufacturer).
Refer to 'Installation and safety instructions' document
(doc. 578.001.130-UK)
SPECIFIC SAFETY INSTRUCTIONS
Use only non-static quality air hose to connect the pump to the spray gun,
Ground the pump (use the connection on the pump),
The compressed air supply must not exceed 6 bar / 87 psi.
Make sure the lubricant in the cup of the fluid section is compatible,
Use the appropriate solvent for the material being sprayed to increase the equipment working life.
