SAMES KREMLIN
Page 15
Manual : 573.190.112
Before reassembling the different components :
-
Clean the parts with the appropriate cleaning solvent,
-
Install new seals if it is necessary after having lubricated them with PTFE grease,
-
Install new parts if necessary.
MOTOR (Refer to doc. 573.023.050)
MOTOR VALVE
Disassemble the hood (15) by removing the 3 M6 nuts (26).
Unscrew the motor valve (14) holding the driving rod (12).
Install the new motor valve (14) and block it on the driving-rod (12) thanks to the two flat parts located at
its end.
Reinstall the hood (15) tightening the 3 nuts (26).
Maximum screwing torque : 4mN / 2.95 ft/lbs
