SAMES KREMLIN
- 1 -
N° : 578.051.110-UK-1712
CAUTION :
Before any intervention on the gun, shut off the compressed air supply and
depressurize the circuits controlling the opening of the gun.
The gun is manufactured under the ATEX agreement and can not be modified.
SAMES KREMLIN will not be held responsible for any failure to comply with that
instruction.
Before removing a component of the gun, some precautions have to be taken :
-
Empty out the paint inside the cup or the receiver.
-
Fill the cup or the receiver with cleaning solvent.
-
Decrease the supply air pressure of the gun.
-
Spray the solvent until it runs clear.
-
Shut off the supply air pressure of the gun.
-
Trigger the gun to depressurize the circuit.
-
Empty out the solvent when using a gravity cup.
-
Remove the part to be cleaned or changed.
Before reassemblying the different components, some precautions must be taken :
-
Clean all the parts with the appropriate cleaning solvent and a brush.
-
Install new seals if it is necessary after having lubricated them with PTFE grease.
-
Install new parts if it is necessary.
A 1
A 1
A 1
A 1
A 1
C 2
C 2
C 2
A 3
