SAMES KREMLIN
- 3 -
N° : 578.022.120-UK-2110
OUTPUTS AND FAN WIDTHS
Nozzle
version
Paint output
(g/mn)
Minimum / maximum fan width (cm / ")
A 29 HTi
+ E3 KHVLP aircap
A 29 HTi
+ EP 3 aircap
A 29 HPA
+ EN 3L aircap
06
150
From 10 to 32 cm
/ from 4 to 12.6"
From 10 to 27 cm
/ from 4 to 10.6"
From 10 to 31 cm
from 4 to 12"
07
200
From 10 to 32 cm
/ from 4 to 12.6"
From 10 to 27 cm
/ from 4 to 10.6"
From 10 to 31 cm
from 4 to 12"
09
250
From 10 to 35 cm
/ from 4 to 14"
From 10 to 31 cm
from 4 to 12"
From 10 to 38 cm
/ from 4 to 15"
12
300
From 10 to 40 cm
/ from 4 to 15.7"
From 10 to 31 cm
from 4 to 12"
From 10 to 38 cm
/ from 4 to 15"
15
350
From 10 to 41 cm
/ from 4 to 16"
From 10 to 34 cm
/ from 4 to 13.4"
From 10 à 40 cm
/ from 4 to 15.7"
18
400
From 10 to 43 cm
/ from 4 to 17"
From 10 to 35 cm
/ from 4 to 14"
From 10 to 41 cm
/ from 4 to 16"
Test conditions for the measure of the fan width :
Paint viscosity : 20 s CA n° 4 - 20°C , distance between the gun aircap and the part to be painted : 20 cm /
7.9"
ADJUSTMENT OF THE NEEDLE INDEXING
The adjustment enables to fine little outputs :
- Choose the nozzle most adapted to the spraying,
- Unscrew completely the needle stop,
- Screw the needle stop until getting the desired output
(that operation decreases the needle stroke).
- Take down the corresponding graduation on the ring to
repeat the same adjusting.
Nota : 1 stop turn corresponds to a needle stroke of 1
mm
(4 maximum turns).
1 graduation corresponds to a needle stroke of 5/100
mm.
Caution : do not reduce the output if it is not
useful. Leave then the opening of the needle to its
maximum.
