Samcon ExCam Series, Руководство по установке

Страница: 9 / 24

Doc.-ID: 180731-PT08BAU-SS-Ex Installation Manual rev.00.docx, Page 9 of 24
All parts of the housing materials, including all external metallic and non-metallic compo-
nents, are made of high-quality materials to ensure corrosion protection and chemical
resistance levels required for the area of application, in "regular" industrial atmospheres
and within the specified temperature ranges.
5 Transportation and storage

Avoid impacts, mechanical stresses, and vibrations.

Make sure that neither the package nor the camera is damaged.

Store the camera in its original packaging and in a dry and weather-proof room, or
protect it from dirt and environmental conditions until its final assembly and instal-
lation.

Avoid extreme heat or cold sources.
6 Commissioning
6.1 Installation
For the camera
’s installation and operation, the relevant national regulations, as well as
the generally accepted rules of technology shall prevail. Before mounting the camera,
thoroughly check it for any transport damage, especially at the housing and cable. Instal-
lation, electrical connection and the first commissioning must only be carried out by quali-
fied personnel.
Attention!
Prior to the camera installation, take external sources of heat or cold
into account! Observe the permissible temperature range!
Attention!
The erection regulations defined in IEC 60079-14 shall apply!
Attention!
If you use the ExCam in the mining sector with a “high” risk of me-
chanical hazard, you must provide an appropriate device ensuring
protection of translucent parts (accessories)