Samcon ExCam Series, Руководство по установке

Страница: 15 / 24

Doc.-ID: 180731-PT08BAU-SS-Ex Installation Manual rev.00.docx, Page 15 of 24
6.2.2
Type T08-TNXCD
Attention! The pressure-resistant dome housing of the type T08-
TNXCD may only be opened if it is explicitly written in the user manual
of the respective camera or in the case of manual adjustment, removal
or changing the SDHC memory card, change of O-ring seals, hardware
reset, etc.
Attention! Observe the warnings given on the type plate:
Note: Depending on the classification of hazard areas, a work approv-
al must be obtained. When adjusting the camera, you must prevent
potentially explosive atmosphere!
The T08 ExCam series camera of the type TNXCD may only be opened due to functional
aspects and only if it is explicitly allowed in the respective user manual. In all other cases,
the explosion-proof housing may only be opened and closed by authorized staff of
SAMCON Prozessleittechnik GmbH. Any damages, irregularities, or changes which,
through the translucent polycarbonate dome cupola, are visible inside the ExCam, for
example, loosened or not completely tightened components, discolouration, or liquid in-
clusions (not to be confused with condensed water!), have to be checked by the manu-
facturer, SAMCON Prozessleittechnik GmbH.
Furthermore, please observe the following instructions:
- Before opening the housing of the T08-TNXCD camera, you should remove the
external accessories, etc.
- To open the housing in an appropriate work surrounding, first detach it from the
wall bracket.
Attention: Carry the connecting cables along and ensure that they are not dam-
aged or bent (observe the specified bending radius), or disconnect them from the
Ex e terminal box or Ex e/Ex d plug-and-socket device, etc.!
- The housing may only be opened via the cable and supply flange. Never open the
optical lens flange!
- To open the housing, fix the body first. The cover flange with cable pigtail should
remain movable (use e.g. clamps or pads on a workbench edge).