Samcon ExCam Series, Руководство по установке

Страница: 10 / 24

Doc.-ID: 180731-PT08BAU-SS-Ex Installation Manual rev.00.docx, Page 10 of 24
6.1.1 Types from T08-VA1.1 to VA2.2
For monitoring of plants and/or persons, the camera can be mounted on swivelling
mounts (accessories). For this purpose, the mounting pin, welded to the bottom of the
camera body dispose of holes with either 6.5 mm or 8.5 mm. The wall bracket is availa-
ble in different sizes and can be mounted in any position via four holes (see Figure 6-1
left ).
Fig. 6-1: T08-VA1.1 to VA2.2. Mounting options
For process monitoring, the camera can be mounted by means of a hinge attachment
suitable for every application (e.g. on sight glass fittings in accordance with DIN
28120/28121 or DIN 11851), see Figure 6-1
right .
Details and availability of accessories are described in the User Manual for the applicable
T08 device.
6.1.2
Type T08-VA2.3
Due to the dimensions and the weight of the ExCam camera with the model key T08-
VA2.3, a
“safety wire" is mandatory in order to protect the device from falling down. The
illustration below shows the recommended method of the safety wire installation. Use the
welded mounting pin at the housing, as well as the special wall bracket "WMB VA2.3" or
"WMB EXCAM XF" and the pole adapter PMB-VA2.x or "PMB EXCAM XF.