Installation /Removal of Antenna
1. Installation of the antenna
⑴
Plug the screw-thread end of the antenna into the socket at the top of the transceiver.
⑵
Rotate the antenna clockwise until tightening up , as shown.
2. Removal of the antenna
Rotate the antenna counterclockwise to remove it.
Installation /Removal of Belt clip
1.Installation of the belt clip
First remove the battery, and then place the clip on the rear top of the
machine, and fix it with two screws by a cross-screw.
Note
:
Do not install the belt clip unless the battery is off.
2. Removal of the belt clip
p
As for the removal of the belt clip, please refer to the installation
steps and loose the screws in counterclockwise.
Installation/Removal of External Earphone or
Microphone
1. Installation of the external earphone or microphone
(1) Unclose the earphone cap (without removing) in the direction of
the arrow
(2) Insert the earphone or microphone
2. Removal of the external earphone or microphone
You can pull out the external earphone or microphone to remove it.
Note: The use of an external earphone or microphone will affect the
waterproof performance of the transceiver.
