■
VOX (Voice Operated Transmission)
There are 9 levels sensitive for choise through by programmer.
Troubleshooting Guide
Battery may have been exhausted. Please update or recharging the
battery.
Battery may not be installed correctly. Please remove the battery and
reload it.
Battery’s lifetime is due. Please update the battery.
Battery is not charged fully, so please ensure that the battery indicator is
green when removing it.
Make sure you are using the same frequency and “sub-audio frequency
/sub audio digital settings” as other members of the group Confirm
Solutions
Problems
No Power
Battery lasts no long after charging
/sub-audio digital settings” as other members of the group. Confirm
whether you are in the valid range of transceiver since other members of
the group may be too far away.
There are voices from other people rather
Please change the sub-audio frequency/sub-audio digital settings. At
than group members in the channel.
this time, be sure to change all the walkie-talkies of the group at the
same time. (Need Users to recharge.)
When transmitting voices, only a small
Confirm whether the rotary volume knob is to the appropriate volume.
or even no sound can be heard on the
Send the machine to Users to check the microphone.
other side.
Consistent noises
Other members of the group may be too far away and can not receive the
voices you send, please get close and try again.
Maintenance and Cleaning
1. Do not lift the transceiver directly by its antenna or external microphone.
2. Dust the transceiver with an anti-pilling cloth to prevent bad contact.
3. When the transceiver is off work, please cover the microphone cap.
4. The buttons, control knob and the casing of transceiver are easy to become dirty after long usage, you can use a neutral detergent
(do not use strong corrosive chemicals) and wrung damp cloth to clean it.
It can not reach others of a group
