background image

Medical devices 
Pacemaker 

Advanced Medical Technology Association of the United States 
proposes holding the handheld transceiver with pacemakers should 
be kept the distance of at least 6 inches (15cm). These proposals 
are consistent with the provisions by the U.S. Food and Drug 
Administration. 

With pacemakers should observe the following 

items: 

When the transceiver is turned on, the distance between the 
pacemaker and the transceiver at least 6 inches (15cm); 
Do not put the transceiver in a breast pocket; 
Please use the pacemaker the other side of the ear to listen, to 
minimize potential interference; 
If you suspect transceiver interference with the pacemaker, 
immediately turn off it. 

Hearing Aids 

Some transceivers may interfere with some hearing aids. When 
there is such interference, you can consult the hearing aid 
manufacturer to discuss alternatives. 

 

 

 

 

 

 

 

 

 
 

Busy Channel Lockout 

This feature can prevent interferences to other walkie-talkies in the 
same channel. If the channel has been occupied, the press of the 
PTT button will bring a continuous "beep" warning tone, while the 
transceiver will return to the receive mode immediately. To stop the 
warning tone, please release the PTT button. Dealers can set this 
function turn on or off by programming software. 

Low Battery Warning 

Low battery warning happens at the time when the battery needs 
charging or replacement. If the battery is low, the transceiver indicator 
light turns red and blinks, and a beep sound can be heard every 5 
seconds. At this time, please replace the battery. 

Voice Operated Transmitting (VOX) 

This feature is designed to trigger the transmitting of voice by voice 
itself. Dealers can choose to turn on or off the VOX feature, and set 
the sensitivity of VOX through programming. With this feature, 
transmitting operation is launched by the voice you said without 
having to press the PTT button. The transmitting operation stops as 
soon as the end of the talk. 

Other Medical Equipments 

If you use other personal medical device, consult the device 
manufacturer to determine whether these devices can effectively 
shield radio frequency energy. Your doctor can provide you with 
such help. 

Safe Driving 

Check your car seat using the transceiver the relevant laws and 
regulations, and follow the regulations. 

If you use the transceiver while driving, please 
note the following: 

Concentrate on driving, pay attention to the situation of the road. 
If possible, try to use the walkie-talkie-free function operation. 
If the provision of using the transceiver while driving prohibited, 
please drive the car to the roadside stop, and then make a call. 

Call function 

Hold down the scan/call button for 2 seconds, the transceiver will 
send out a specific sub-tone that your companion transceiver will ring 
prompted a call. 

Wireclone function 

Connect the copy line, hold down the scan / call button to power 
on the transceiver, when you see the status indicator turns orange, 
release the scanning / call button. Then press the PTT key to copy 
the data channel to another radio. During the replication, copy 
transceiver status indicator is flashing red and copied transceiver 
status indicator is flashing green. After replication complete, copy 
transceiver status indicator turns orange. If replication error occurs, 
the copy transceiver status indicator flashes orange. 

23

Содержание FPBN10A

















Отзывы: