background image

 

14 

 

 

 

 

 

 

 

 

 

 

 

Battery Information 

Battery on First Use 

Since batteries leave factory without a fully charging, please charge 
the new batteries before using. Under normal circumstances, the 
battery on first use needs 5 hours of charging. The first three times 
of fully charging and discharging provides batteries the best capacity. 
When you find out the battery is low, it is required to charge or 
replace it. 

Compatible Battery Type 

Please use the            specific battery for the use of other batteries 
may cause explosion, resulting in bodily injury. 

Safety Precautions 

1. Do not dispose the batteries in the fire. 
2. Do not dispose the batteries as household wastes, and it must be 

collected and treated properly. 

3. Do not rip off the shell from the battery without permission. 

Notes: 

1. When charging, the temperature should be between 5

  ~40 

otherwise it may cause the leakage or even damage the battery. 

2. Please shut down the transceiver with battery loaded before 

charging it. The use of the transceiver while charging is ongoing 
will affect the normal battery charging. 

3. Do not put back and charge the battery that is already full, for it 

will significantly reduce the cycle life. 

4. Since continuous charging will shorten the life of the battery, it is 

unwised to place the transceiver or battery on the charger, or take 
the charger as a placement seat for the transceiver. 

5. Do not charge the battery when it is wet. You should dry it first in 

order to avoid any danger. 

6. If the battery’s usage time is very short even when it has been 

charged in completely correct way, it can be concluded that the 
battery life is due and should be replaced by a new one. 

 

 

 

 

 

 

 

 

 

 

Extension of Battery life 

1. The performance of the battery will be reduced when the 

temperature drops below 0 . In cold weather, it is advised to 
spare another battery for emergency. Please do not dispose the 
cold batteries that can not work at low temperature but may be 
usable at room temperature. 

2. It may affect the normal use or charge of the battery, if it is 

covered with dust. Please clean the battery with dry cloth before 
loading or charging it. 

Knowledge about Battery Storage 

1. Since the battery will self-discharge, please do charge it fully 

before putting it aside so as to prevent damages caused by 
overdischarge. 

2. Please take out the battery after storage for some time to fill it, in 

order to avoid the reduction of the battery capacity resulting from 
overdischarge. It is proposed for lithium-ion / lithium-polymer 
batteries to be filled in every 6 months of storage. 

3. Please pay attention to the humidity of the battery storage 

environment. Batteries are supposed to be stored in the 
environment of room temperature, cool and dry air, to reduce the 
self-discharge. 

Charging Operation 

Please use SAMZUK-specified charger to charge the battery; the indicator 
light of the charger shows the completion of charging operation. 

 

Indicator Light                    State 
Red light                            Be charging 

Green light                        Charging completed 

 

 

Please do the following steps to charge: 
1. Insert the AC plug of the power adapter into the AC power outlet. 
2. Insert the DC plug of the power adapter into the DC jack on the 

back of the charger, and the indicator will flash for a short time. 

15

 

Содержание FPBN10A

















Отзывы: