background image

 

 

 

 

 

 

 

 

 

 

 

 

Handheld Transceiver Safety Guidelines and 
Instruction 

To control the transceiver radiation, ensure to meet the general or 
non-controlled environment radiation limitation standard, please 
operate following below procedures. 

Press PTT key when talking; and release PTT key when receiving. 
Because measured RF energy radiation will be generated when 
transmitting, so transmitting time should not exceed 50% of the 
using time. 
Place the tranceiver vertically on the front, make sure the 
microphone (and other parts including the antenna) is no less than 
1 to 2 inches (ie 2.5 to 5cm) away from your lips when transmitting 
signals. It is very important to keep the correct distance from the 
transceiver, since the farther away the less radiation. 
If you carry the portable transceiver around your body, please put 
into SAMZUK specially designed fixture, leather, box or other annex. If 
not, the body by radiation will be out of range of general or non- 
controlled environment RF radiation limitation that required by 
Radio Authority, Ministry of Information Industry. 
If you do not use any accessories, not place the transceiver on the 
front specified location, please make sure that it is no less than 1 
inch (about 2.5cm) away from your body when transmitting signals. 
It is very important to keep the correct distance from the transceiver, 
since the farther away the less radiation. 
Only use the certified and provision antenna, battery and 
accessories or other alternatives by Samzuk. If not, the radiation will 
be out of range of RF radiation that required by Radio Authority, 
Ministry of Information Industry. Below web site lists the approved 
parts and accessories by Samzuk 

 

 

 

 

 

 

 

 

 
 

QT & DQT tables 

 

Frequency of 50 groups QT (Hz) 

 

 

 

 

 

 

 

 

 

Code of 105 groups DQT 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

25

Содержание FPBN10A

















Отзывы: