SAMCOM FPBN10A, Руководство пользователя

Страница: 3 / 16

Troubleshooting Guide
User Security Information
Problems
No Power
Battery lasts no
long after charging
It can not reach
others of a group
Solutions
Battery may have been exhausted. Please
update or recharging the battery.
Battery may not be installed correctly. Please
remove the battery and reload it.
Battery’s lifetime is due. Please update the
battery.
Battery is not charged fully, so please ensure
that the battery indicator is green when
removing it.
Make sure you are using the same frequency
and “sub-audio frequency/sub-audio digital
settings” as other members of the group.
Confirm whether you are in the valid range of
transceiver since other members of the group
may be too far away.
Handheld transceiver product safety and RF
radiation
Warning: Please read the manual carefully before
using. It contains the important safety using operation
instruction, and RF energy and control information
contributing to meet the RF radiation limitation
requirement of national and international standards.
Information provided in this manual may replace the general safety
information of the editions before.
26
There are voices
from other people
rather than group
members in the
channel.
When transmitting
voices, only a small
or even no sound
can be heard on the
other side.
Consistent noises
Please change the sub-audio frequency/sub-
audio digital settings. At this time, be sure to
change all the walkie-talkies of the group at
the same time. (Need dealers to rechange.)
Confirm whether the rotary volume knob is to
the appropriate volume.
Send the machine to dealers to check the
microphone.
Other members of the group may be too far
away and can not receive the voices you
send, please get close and try again.
3