SaMASZ MIDO 140, Руководство оператора

Страница: 13 / 33

Instruction manual
Rear - front and rear flail mowers
MIDO, GRINO, VINO, MAMUT, RIO
-
11
-
For seizing the machines pick lines of adequate length, so that the angle between them was no
greater than 120°, and the angle of inclination between the cable and the vertical was no greater
than 60°,
Collapsible parts should be blocked in transport position,
When relocating the mower onto another vehicle, there should be no unauthorized personnel
permitted to remain within the danger area,
The mower should be protected against moving on the vehicle's trailer.
WARNING!
Securing the maneuver area and providing safety for operation performed is
the responsibility of the person in charge of moving of the machine.
Fig. 7. Location of center of gravity
Tab. 6. Location of center of gravity
Model:
Dimension [mm]
D E F
MIDO 140 366 741 585
MIDO 160 376 847 718
MIDO 180 377 917 725
MIDO 200 371 866 635
MIDO 220 385 1004 681
GRINO 160 429 792 576
GRINO 180 455 1082 700
GRINO 200 455 1182 700
GRINO 220 455 1278 700
VINO 180 548 1027 660
MAMUT 250 500 1234 733
MAMUT 280 500 1541 773
MAMUT 300 500 1540 740
RIO 250 488 1295 731
RIO 280 484 1418 661
4.5. Working parts
Before operating the mower check the condition of the flail blades.
Replace any worn or damaged flail blades immediately.
In case of excessive machine vibrations during operation, make sure the flail shaft is well
balanced.
WARNING!
When replacing working parts, always use protective gloves.
F
D E