Operator’s manual
Double-sided disc mowers
with central suspension
- 7 -
3.2.
Design and working principle
3.2.1.
Double-sided disc mowers without swath conditioner/rollers
Fig. 3a. Parts of SaMASZ double-sided mower (KDD 861 and KDD 941)
Fig. 3b. Parts of SaMASZ double-sided mower (KDD 860 and KDD 940)
3-point linkage frame (1) enables attachment of the mower to tractor’s 3-point linkage. Drive
from tractor’s rpm is transmitted through intersecting axis gear (3) on PTO shaft (6), which through
intersecting axis gear (7) drives the cutterbar (4). On the cutterbar (4), there are discs with two
knives each. Hydraulic cylinder (2) is used to adjust the mower to working position. The mower's
power is supplied by the outer hydraulics of the tractor. Main frame (11), on which the cutterbar is
situated, is supported by the springs (8). There is a safety guard (5) mounted on the 3-point linkage
frame. Mower is equipped with warning and signal plates (10) as standard.
11
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
8
9
10
