Operator’s manual
Double-sided disc mowers
with central suspension
- 15 -
Fig. 8. Transport holders
Grab the mower by any lifting devices only in places indicated by hook sign (Fig. 8),
For mower lifting, use only lifting devices with hoisting capacity larger than mower’s
weight shown in data plate. This also applies to ropes and chains used for lifting,
Do not lift if transport belts, belt suspensions, ropes are damaged. Whenever damage to
these parts occurs, replace with new ones,
When mounting slings, chains, handles etc., always set the machine's center of gravity
properly,
To safely support the machine, use ropes of adequate length so that the angle between them
is no greater than 120°, and the angle between the strand and the vertical is no greater than
60°,
Lift the machine with the utmost caution and move it slowly,
No one should be within the range of action of the lifting equipment when any transporting
operations are being carried out.
Collapsible parts should be blocked in transport position,
When the mower is on the vehicle’s trailer, the machine should be secured against moving
Fig. 9. Location of centre of gravity
on
mowers KDD 941 S T H
