Operating manual
Tractor mounted snow plow
City, City K, City Up
-
11
-
lower plow's hitch onto vehicle's/tractor’s front linkage (with use of the hydraulics),
upon mounting of the hitch on DIN linkage, protect the connection with M24 bolts.
Fig. 10. The City Up plow mounted on the truck
If a vehicle has no floating option for lifting cylinder available, then:
lift the plow up by means of vehicle’s hydraulics and turn off connector's valve located near
EURO plug. This allows for smooth ground following.
5.3.
Plow control
5.3.1.
Standard control
ATTENTION:
Prior to mounting plow make sure that polarity of aggregated machine is the
same as driver's (Fig. 11). Wrong polarity will cause damage to the driver.
Fig. 11. Polarity of driver's plug
Once hydraulics and power plug are connected, move control panel along with cable to tractor's
cabin and connect the plug to lighter's connector 12V (Fig. 12). In order to lift/lower the plow, use
control lever for tractor's front 3-point linkage. Hydraulics control lever is used to rotate shield.
Switching between right and left plow's shield is possible thanks to switch (B2) on control panel (B).
̶
+
Place hitch holders in
front linkage connectors
Protect hitch with bolts
by screwing to front
linkage
