Operating manual
Tractor mounted snow plow
City, City K, City Up
-
19
-
10.
DISASSEMBLY AND DISPOSAL
ATTENTION!
During assembly and disassembly please remember about body protection and
environmental protection.
10.1. Disassembly
In the event of partial wearing out of the snow plow it should be repaired by replacing worn-out
components. In order to accomplish this, the plow should be carefully cleaned and washed.
If necessary drain the oil into a watertight container or plug up the connecting fittings. Next replace
the worn-out parts with new ones using new connections, hardware and gaskets. The bolts should be
tightened according to the class of their strength (Tab. 5).
During assembly and disassembly use extreme caution and use schematics from the spare parts
catalogue. Damaged or worn-out parts should be kept in a designated place and then delivered to
a scrap yard or recycling center.
10.2. Disposal
In the event of wearing out of the plow to the level which does not allow its further operation it
should be disposed of. In order to accomplish this, the plow should be carefully cleaned and washed.
First drain the oil from the hydraulic system and send off to be recycled. Next disassemble the snow
plow remembering to separate the parts according to the material they are made of and deliver them to
a scrap yard or a recycling center.
10.3. Environment
The snow plow is fully environmentally friendly
Materials of the plow are in 95% recyclable.
Packing materials of the plow are 100% recyclable.
Worn-out plow parts and packaging should be recycled according to local recycling regulations.
During the entire lifetime of the plow please be careful not to allow the oil to leak out of
the hydraulic system which could cause contamination of the natural environment.
