Operating manual
Tractor mounted snow plow
City, City K, City Up
-
17
-
6.
OPERATIONAL MAINTENANCE
Every time before starting work:
make certain that the plow is properly connected to the tractor,
check the condition of the hydraulic hoses and fittings,
check the hydraulic system and marker lights
check the level of wear on the blade insert and replace if necessary,
check the tightness of all bolts and nuts according to Tab. 5,
when installed adjust the height of support wheels or skids,
in the event of broken bolts or damaged parts - replace them.
Tab. 5. Values M
A
of bolt torque
After 5 workhours:
check the condition of blade inserts,
check the condition of mount securing bolts and replace if necessary,
when installed adjust the height of support wheels or skids if necessary.
After finishing work:
carefully clean and wash the plow.
7.
MAINTENANCE AND STORAGE
In the event when the plow will be parked for a period longer than two weeks, always perform
the following maintenance:
carefully clean and wash the plow,
if the plow requires repairs, adjustments, gasket replacement, or hose replacement this should be
completed,
remove any rust spots and touch up any damaged paint,
protect metal surfaces with a light coating of a thick lubricant such as ŁT – 43, mineral oil or gear
oil like 15W40,
replace any illegible warning or informational signs,
protect the connecting fittings of the hydraulic hoses.
ATTENTION!
The snow plow should be stored in the retracted position - with the actuators
retracted, in a dry and clean place, not accessible to unauthorized personnel or
animals, on flat, level and hard surface under a roof or other covering which
will protect it from atmospheric weather conditions.
KL
A
6,8
8,8
10,9
12,9
M
A
[Nm]
M4
2,2
3,0
4,4
5,1
M5
4,5
5,9
8,7
10
M6
7,6
10
15
18
M8
18
25
36
43
M10
37
49
72
84
M12
64
85
125
145
M14
100
135
200
235
M16
160
210
310
365
M18
220
300
430
500
M20
310
425
610
710
M22
425
580
820
960
M24
535
730
1050
1220
