Sam4s ER-180U Series Скачать руководство пользователя

Страница: 45 / 77

User Messages

•

••

•

User Messages

E00

The wrong key sequence has been used.
- Press CLEAR

A PLU code greater than 500 has been entered.
- Enter a valid code between 1 and 500

A Clerk code greater than 10 has been entered.
- Enter a valid code between 1 and 10

The amount count (quantity) is over the limit.
- Enter an amount below the value limit.

The date and time are required.
- Program the date and time

A limit restriction has been added to this key preventing an amount entry.
- This function has been programmed, see function status to remove limit

The item limit in the transaction has been reached.
- Finalise the sale and begin another transaction

The Subtotal is required.
- Press the SUBTOTAL key and continue with the action.

It is not possible to void this item.
- Continue with normal operation.

E10

This function is programmed only to accept a preset value.
- Ensure a preset amount has been programmed to function or sales item.

E11

This function is programmed only to accept a manual value.
- Enter the required value for this function.

E12

This operation requires an amount entry.
- Enter the amount appropriate to the operation being carried out.

E13

The requested function is not valid.
- Attempt an accepted operation.

E14

Electronic Journal report is full.
- Reset the report with or without a print as per the reports chapter

E15

It is necessary to declare amount of monies in drawer before report print.
- Refer to the cash declared section within the reports chapter.

E16

It is necessary to run a Z report as the next action.
- Refer to the reports chapter for valid reporting operations.

E17

Inactive function.
- This function is set as inactive, see function status to enable key.

E20

Mode password is required.

- Refer to the mode password chapter.

E21

Printer stops to be cooling of printer.

PEA

Receipt paper near end and/or The paper arm is not shut correctly.
- Insert a new 57mm thermal paper roll and/or close the paper arm

Содержание ER-180U Series














































































Результаты поиска

Содержание ER-180U Series

Отзывы:

Похожие инструкции для ER-180U Series

Бренды по названию

Популярные бренды

Sam4s ER-180U Series, Руководство по эксплуатации и программированию

Результаты поиска

Содержание ER-180U Series

Отзывы:

Похожие инструкции для ER-180U Series

Бренды по названию

Популярные бренды