Saluki S3101 Series, Быстрый старт

Страница: 11 / 30

11
Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com

【
Marker
】
: Used to set the marker functions, including marker ON/OFF, marker mode, peak search and marker dragging
mode.

【
Cal
】
: Used to realize the calibration functions, including calibration method, calibration status ON/OFF and selection of
calibration kit model.

【
Save/Recall
】
: Used to realize the file operations, including save and load measurement status and measurement trace,
screen capture, storage position and file copy.

【
Limit
】
: Used to realize limit test functions, including limit test ON/OFF, alarm ON/OFF as well as the compilation, saving
and loading of limit traces.

【
Run/Hold
】
: Used to switch the results between continuous sweep and holding current sweep of the Analyzer.

【
Meas
】
: used to set the measurement mode and single-dual window switch

【
System/Local
】
: When in local operating mode, it is used for the settings of system mode, such as the switch of modes
between antenna test and power test, setting of system date, time, power save mode, and view of product serial number and
internal program version number of the Analyzer; when in remote control mode, it is used to return the Analyzer to local
function.

【
↑
】
&
【
↓
】
: Mean increase and decrease respectively and used to control step or select current options.

【
←
】
Backspace Key: Used to delete the last entered number or character.
 【
Esc
】
: Used to invalidate the entered values and close the input label when entering parameters.
 【
Enter
】
: Used to validate the entered values when entering parameters.
LED indicator: with yellow and green two colors, the physical state of the instrument corresponding to the color is as shown in the
following table.
Table 2.2 LED Status Descriptions
Instrument
Status
LED status Physical state of Analyzer
Off state
Off
a)
The battery has been installed; not connected to the power supply.
b) The battery has not been installed; not connected to the power supply.
Constant yellow
a) Battery has not been installed; connected to power supply.
b)
The battery has been installed and full; connected to power supply.
Flashing yellow The battery has been installed and not full; connected to power supply.
On state
Constant green
a)
The battery has not been installed; connected to power supply.
b)
The battery has been installed and full; connected to power supply.
c) The battery has been installed battery; not connected to power supply.
Flashing green The battery has been installed and not full; connected to power supply.