2. Use a slight back and forth motion while directing the Steam Nozzle
towards the material you wish to steam.
3. Move the Steam Nozzle away from the garment and smooth the fabric
with your free hand.
4. Repeat as necessary until the garment is wrinkle-free.
5. When finished using the Fabric Steamer & Iron, immediately turn
the On/Off Switch to the ‘Off’ position and unplug the power cord
from the electrical outlet.
Ironing Garments
In some instances, pressing a crisp crease or iron collars or cuffs is needed
and can be easily accomplished using the iron feature.
1. Remove the Fabric/Lint Brush.
2. If the unit has not recently been in use, allow the Ironing Plate to heat up
for approximately 2 minutes.
3. To use the Press Pad, slide the Velcro strap onto your hand. Place fabric
over the Press Pad. Iron fabric while pressing it firmly against the pad.
Use the iron to press crisp creases, collars or cuffs. If a steam burst
is desired, simply press the Steam Button.
4. You can also use a folded towel placed on a table or countertop instead
of the Press Pad.
NOTE:
Make sure that the towel is thick enough so that
the heat does not transfer to the table or countertop.
5. When finished using the Fabric Steamer & Iron, immediately turn
the On/Off Switch to the ‘Off’ position and unplug the power cord
from the electrical outlet.
HELPFUL HINTS:
•
Curtains and draperies can be steamed while hanging.
•
To remove wrinkles from towels, handkerchiefs and napkins,
drape them over a rod or towel rack and gently steam.
•
Heavier fabrics may require repeated steaming.
•
To remove stubborn wrinkles, steam both sides of the fabric.
•
Be especially careful when steaming delicate fabrics and those likely
to be damaged by water spotting.
•
The best way to avoid mineral build-up caused by high mineral
content in water is to use de-mineralized or distilled water in the
unit.
8
Booklet_ST-1014_EN.qxd 4/1/08 5:54 PM Page 8
