Salton Platinum Series, Инструкция пользователя

Страница: 11 / 12

Troubleshooting
Problem Cause Solution
The unit fails to heat up. • Unit is not plugged in. • Plug into an electrical
Heater Indicator Light outlet.
does not illuminate. • Household circuit • Reset circuit
breaker/ground fault breaker/ground fault
interrupter has tripped interrupter or replace
or blown a fuse. fuse. If you need
assistance, contact
a licensed electrician.
Unit heats up but fails • Heat up time has not • Allow the unit to heat
to steam. Heater elapsed. up for 2 minutes.
Indicator Light does • Water Reservoir is empty. • Refill Water Reservoir.
illuminate. See instructions in
‘Filling the Water
Reservoir’ section.
• Steam Button is not • Press and hold the Steam
being pressed. Button for a few seconds
for steam to begin
flowing.
• Mineral build-up in unit. • Follow ‘Removing Mineral
Build-Up’ procedure.
If problem persists, contact
Customer Service.
Steam output • Steam Button not being • For continuous steam,
is intermittent. pressed continuously. press and hold
the steam button.
• Mineral build-up in unit. • Follow ‘Removing
Mineral Build-Up’
procedure.
Loud pumping sound • Low water level in Water • Follow the procedure in
when Steam Button Reservoir. the ‘Filling the Water
is pressed. Reservoir’ section.
11
Booklet_ST-1014_EN.qxd 4/1/08 5:54 PM Page 11