Via Pro User’s Guide – TouchChat
128
Pause on First Item
Pause on First Item allows you to find the next item you want to select before a scan resumes. When
this setting is turned on, a scan will pause on the first item for the number of seconds you specify and
will pause again after the item has been selected and the scan resumes.
Setting Loops
When Auto Scanning is turned on, the Loops setting determines the number of times a scan will go
through all items and start over automatically. When the set number of loops finishes, the scan will stop.
You can start the scan again by activating the switch.
Sound Effects
When Sound Effects is turned on, a clicking sound is activated as a scan moves from one item to
another.
Speech
When Speech is turned on, an item is spoken as well as highlighted when a scan selects it.
Menu Items
When Menu Items is turned on, you can select what items show up in the pop-up menu during a scan.
Group Items
When Group Items is turned on, a scan display items on the screen in groups instead of individually. This
allows you to scan between groups, select a group, and then select an item within the group.
Cursor Color
Use the Cursor Color setting to change the color of the scan border to make it easier to see as it moves.
Long Press
Note:
Long Press is not currently available within the iPad Pro software.
Dwell Time
When Step Scanning is selected, Dwell Time allows you to set the number of second the user must wait
for an item to be selected on the screen automatically.
Auto Hide
When Step Scanning is selected, Auto Hide will make the scanning cursor disappear if the user does not
activate the switch within a predetermined number of seconds. Activating the switch will redisplay the
cursor.
