Sakai SV410-2, Руководство оператора

Страница: 67 / 77

– 62 –
3. PERIODIC MAINTENANCE
(6) As required
⑤
Air cleaner
When the red float of the dust indicator reaches the service level (a mark on the indicator),
clean the element as described below:
1) Pull the clip and turn the cover 12 degrees counter clockwise to remove it. With draw the
element.
2) Blow compressed air from inside of the element.
WARNING
Exercise caution not to get a speck of dust in your eye.
3) Check the element for any damage and replace as necessary, before pushing the dust
indicator reset botton.
4) Reinstall the element and fix the cover with the clip.
Turn the cover 12 degrees clockwise and push in the clip to fit it.
NOTE: In normal use, change the other element once in every six cleanings.
CAUTION
Replace the element when the red float reaches the service level even if it is cleaned.
Dust indicator
Element (INNER)
Element (OUTER)
Clip
– 63 –
3. PERIODIC MAINTENANCE
⑦
Tires
1) Check for unusual wear and damage.
2) Check for the inflation. 137 kPa {20 psi}
3) Check the wheel nuts for looseness.
Fuel tank
1) With the drain plug removed, remove the water and sediment from the bottom of the tank.
2) If sedimentation is substantial, remove the drain plug and clean the interior of the tank.
3) When the necessary work and refueling are complete, tighten the filler cap positively.
NOTE: When removing the water and sediment from the
tank filled with the fuel, the fuel will gush out if the
drain plug is screwed out completely.
WARNING
• The fuel will catch fire if open flames or ignition
sources are used close to it.
• Do not smoke or use a match or cigarette lighter
close to it.
Roll
The roll may be worn deeply and broken depending on the operation method and the
condition of the site. Check the roll occasionally in the same way as tires.
Drain plug
Fill port