Sakai SV410-2, Руководство оператора

Страница: 27 / 77

– 22 –
Horn switch button
Pressing the button at the center of the steering wheel
sounds the horn.
Vibration switch
By means of vibration switch located on the panel,
selection of vibration amplitude and On-Off is mode.
position: Turning the vibration switch clockwise causes
the vibration to start with high amplitude.
position: Vibration is shut down.
position: Turning the vibration switch counter clockwise
causes vibration to start with low amplitude.
NOTE: For vibratory rolling, run on full throttle.
Vibration selector switch
Selection can be mode between the vibration switch
installed to the Forward-Neutral-Reverse (F-N-R) lever
and the other one located on the panel.
position: Vibration can be turned ON or OFF with
the switch located on the Forward-Neutral-
Reverse (F-N-R) lever. Pressing this switch
causes the vibration to start and pressing it
again to stop.
This vibration switch on the lever should be
used with the vibration switch on the panel
placed at or position.
CONT position: Have this switch placed at this position when
vibration is not to be actuated.
NOTE: For vibratory rolling, run on full throttle.
Vibration selector switch
CONT.
Vibration switch
Vibration switch
– 23 –
IMPORTANT
• Do not operate the vibrator on a hard area such as cement concrete pavement
surface or the ground covered by thick steel sheets.
• Keep the vibrator stopped when the machine is at rest.
• Shut off the vibrator immediately when the machine has been caught in the mud
during vibratory operation.
Speed change switch
Selects three vehicle speed ranges.
( ) (Low) (High)
Speed 0
〜
7 (0
〜
4.3) 0
〜
6 (0
〜
3.7) 0
〜
10 (0
〜
6.2)
km / h (mile / h)
IMPORTANT
Be sure to shift gears while the vehicle is being stopped. Do not shirt gears
during running.
2.1.4 Operating levers / pedals
Forward-Neutral-Reverse (F-N-R) lever with vibration switch
Moving the F-N-R lever forward or backward makes the
machine travel forward or backward respectively. The
neutral position brings the machine to a stop. The vehicle
speed increases or decreases in proportion to the lever
displacement.
Provided at the knob of the lever is the vibration switch for
turning on or off the vibration.
IMPORTANT
• For normal braking, return the F-N-R lever back to neutral.
• In an emergency, depress the brake pedal or press the parking brake button.
Ⓝ
Neutral
Ⓡ
Ⓕ
Reverse
Forward
Vibration ON / OFF
REVERSE
SLOPE
OPERATION
Speed change switch
REVERSE
SLOPE
OPERATION
TRAVEL MODE