Sakai SV410-2, Руководство оператора

Страница: 12 / 77

– 8 –
1. BASIC SAFETY PRECAUTIONS
WARNING: Negligence of these instructions can lead to accidents.
1.4 After Starting the Engine
■
Secure safety around the machine
• Ensure that the area around the machine is clear of
personnel and obstructions. Pay particular attention to
dead spaces. Before starting, sound the horn.
■
Warm up the Engine
• Do not put your machine into motion immediately after the engine has started, let it idle for
several minutes until it is at operating temperature.
• Check the area where the machine has parked for signs of leakage or oil, fuel and water. If
any leakage is noticeable, determine the cause and make corrections immediately.
■
Have a trial run
• Make a test run in a safe place to check that there are no abnormal signs. If found to be
abnormal, rectify the fault before traveling again.
• Listen for unusual sounds, and check for abnormal temperature rise. If abnormal, park the
machine in a safe location and find the source of trouble before operating.
1.5 During Operation
■
No other person but the operator
• This machine is a one-man roller. Do not allow anyone to get on. Only the operator is
allowed on this machine while it is running or in operation. Radios are not permitted.
■
Sit in the driver’s seat before starting operation
• Sit in the driver’s seat before starting operation. Be sure to wear the seat belt when
provided.
■
Before mounting, be sure areas around the machine are safe
• Before getting on the machine, make certain that there are no obstacles around the
machine and no workers under it. If some workers are present or close to the machine, tell
them that the machine is about to move, warning them to stay away from it.