Sakai SV201-1, Руководство по ремонту

Страница: 117 / 238

6-018
VIBRATORY DRUM • REAR AXLE
2-3-2. Reassembly of vibratory drum
Before reassembling, clean disassembled parts well and
check that there is no abnormality.
WARNING
When standing the drum, use wooden blocks of
sufficient strength to securely support the drum.
Carry out the work in an unstrained posture using a
work stool or the like.
•
•
1) Stand drum (1) with side without round pipe facing up.
Place marks to upper side of drum at holes on extended
line from round pipe.
Drum SUBASSY
SV201D
-1
: 970 kg (2,138 lbs.)
SV201T
-1
: 1,105 kg (2,436 lbs.)
SV201TF
-1
: 1,825 kg (4,023 lbs.)
SV201TB
-1
: 1,105 kg (2,436 lbs.)
2) Reassembly of holder SUBASSY
2-1) Apply a coat of gear oil to holder (8) at where bearing
will be press-fitted.
Drive in vibrator bearing (9).
(NOTICE)
Take care not to damage the bearing when installing
it.
2-2) Reverse holder SUBASSY.
Holder SUBASSY : 65 kg (143 lbs.)
•
•
•
•
SV201-1-06038
Place a mark at holes
Round
pipe
SV201-1-06038
Place a mark at holes
Round
pipe
SV201-1-06039
9
8
SV201-1-06039
9
8
SV201-1-06040
Holder
SUBASSY
SV201-1-06040
Holder
SUBASSY