Sakai SV201-1, Руководство по ремонту

Страница: 191 / 238

9-014
TROUBLESHOOTING
2-2-1. Engine will not start (Starter motor does not run) 2/3
F-R lever must be in “N”.
Parking brake switch must be applied.
Foot brake switch must be ON (Brake pedal is not depressed).
Reference Fig.: 2-2-1
Check point Check/Cause Action
6. F-R Lever Switch (1) When starter switch is ON, measure voltage between
F-R lever switch terminal COM inlet wire RL and
chassis ground.
Standard voltage : 12 V or more
(2) When starter switch is ON, measure voltage between
F-R lever switch terminal NC outlet wire GW and
chassis ground.
Standard voltage : 12 V or more
If above item (1) is OK and item (2) is NG, F-R lever
switch is faulty.
•
Replace F-R lever
switch.
7. Interlock Relay (1) When starter switch is ON, measure voltage between
interlock relay terminal 2 inlet wire GW and chassis
ground.
Standard voltage : 12 V or more
(2) When starter switch is START, measure voltage
between interlock relay terminal 5 inlet wire BW and
chassis ground.
Standard voltage : 12 V or more
(3) When starter switch is START, measure voltage
between interlock relay terminal 3 outlet wire L and
chassis ground.
Standard voltage : 12 V or more
If above items (1) and (2) are OK and item (3) is NG,
interlock relay is faulty.
•
Replace interlock relay.
8. Parking Interlock Relay (1) When starter switch is ON, measure voltage between
parking interlock relay terminal 1 inlet wire BrR and
chassis ground.
Standard voltage : 12 V or more
(2) When starter switch is START, measure voltage
between parking interlock relay terminal 5 inlet wire L
and chassis ground.
Standard voltage : 12 V or more
(3) When starter switch is START, measure voltage
between parking interlock relay terminal 3 outlet wire
LR and chassis ground.
Standard voltage : 12 V or more
If above items (1) and (2) are OK and item (3) is NG,
parking interlock relay is faulty.
•
Replace parking interlock
relay.
•
•
•