Sakai SV201-1, Руководство по ремонту

Страница: 193 / 238

9-016
TROUBLESHOOTING
2-2-1. Engine will not start (Starter motor does not run) 3/3
F-R lever must be in “N”.
Parking brake switch must be applied.
Foot brake switch must be ON (Brake pedal is not depressed).
Reference Fig.: 2-2-1
Check point Check/Cause Action
9. Starter Relay (1) When starter switch is START, measure voltage
between starter relay terminal 1 inlet wire LR and
chassis ground.
Standard voltage : 12 V or more
(2) When starter switch is ON, measure voltage between
starter relay terminal 3 inlet wire R and chassis ground.
Standard voltage : 12 V or more
(3) When starter switch is START, measure voltage
between starter relay terminal 5 outlet wire RB and
chassis ground.
Standard voltage : 12 V or more
If above items (1) and (2) are OK and item (3) is NG,
starter relay is faulty.
•
Replace starter relay.
10. Foot Brake Switch (1) When starter switch is ON, measure voltage between
foot brake switch terminal COM inlet wire R and chassis
ground.
Standard voltage : 12 V or more
(2) When starter switch is ON, measure voltage between
foot brake switch terminal NO outlet wire LgR and
chassis ground.
Standard voltage : 12 V or more
If above item (1) is OK and item (2) is NG, foot brake
switch is faulty
•
Replace foot brake
switch.
11. Parking Brake Switch (1) When starter switch is ON, measure voltage between
parking brake switch terminal 1 inlet wire LgR and
chassis ground.
Standard voltage : 12 V or more
(2) When starter switch is ON, measure voltage between
parking brake switch terminal 2 outlet wire BrR and
chassis ground.
Standard voltage : 12 V or more
If above item (1) is OK and item (2) is NG, parking brake
switch is faulty.
•
Replace parking brake
switch.
12. Harness Connecting
Between Terminals
Measure resistance of harness connecting between
terminals.
Standard resistance : 10 Ω or less
If resistance is abnormal, harness is faulty.
•
•
Repair or replace
harness.
•
•
•