Sakai SV201-1, Руководство по ремонту

Страница: 209 / 238

9-032
TROUBLESHOOTING
2-5. Lighting
Check following items before troubleshooting.
No blown fuse and power is applied up to fuses.
When measuring voltage and current without disconnecting connectors, refer to “measuring voltage and current
following using tester” (P. 9-006 to P. 9-008).
Check any ground circuit which belongs to components to be checked.
2-5-1. Illumination of combination meter does not turn on
Reference Fig. : 2-5-1
Check point Check/Cause Action
1. Harness Measure resistance between fuse box terminal 3 wire No.
41 wire RG and combination meter connector terminal
wire No. 41 wire RG.
Standard resistance : 10 Ω or less
If resistance is abnormal, harness is faulty.
•
•
Repair or replace
harness.
2. Combination Meter
(Combination meter
illumination)
(1) When starter switch is ON, measure voltage between
combination meter terminal wires and ground terminal
wire.
Battery terminal wire No. 35 inlet wire YW and ground
terminal wire B
Starter switch terminal wire No. 28 inlet wire LgW and
ground terminal wire B
Standard voltage : 12 V or more
(2) When starter switch is ON, measure voltage between
combination meter illumination terminal wire No.41 inlet
wire RG and chassis ground.
Standard voltage : 12 V or more
If above items (1) and (2) are OK and combination meter
does not turn on, combination meter is faulty.
•
•
•
Replace combination
meter.
•
•
•