Sakai SV201-1, Руководство по ремонту

Страница: 130 / 238

6-031
VIBRATORY DRUM • REAR AXLE
34) Apply sufficient amount of lithium-based grease to rollers
of roller bearing (16) inner race.
Drive in roller bearing (16) inner race until rollers come in
contact with outer race.
35) Preload adjustment of roller bearing
①
Install a shim of about 1 mm (0.04 in.) and secure cover
(31) to axle shaft (12) with three bolts (30) and spring
washers.
②
A gap will remain between end of axle shaft (12) and
inside of cover (31).
Tighten bolts (30) to a torque of 29 N·m (21 lbf·ft).
Give axle (19) two to three turns.
Tighten bolts (30) to a torque of 29 N·m (21 lbf·ft) again.
Repeat this work several times until tightening torque of
bolts no longer fluctuates.
•
•
•
•
•
SV201-1-06074
16
SV201-1-06074
16
SV201-1-06075
12
30
31
Shim
SV201-1-06075
12
30
31
Shim
SV201-1-06076
12
31 30 19 Shim
Ga
p
SV201-1-06076
12
31 30 19 Shim
Ga
p